MUKAI UNIFORM COIL REWINDER ,PATENT

FIRST IN THE WORLD

All the coils will be rewound without slackening because of the automatic and independent adjusting system.

CARACTERISTICS

1. These coil rewinders are to be installed for both existing plate type and divider plate type rewinder machines.
2.The coills will be rewound without slackening.
3.Rewinding tension is to be adjusted for each product requirement.
4.The pit and the tension pad which were installed for the purpose of adjusting difference of coil thickness are no longer necessary.
5.Because of no additional screw-up works, no scratch on the coil and shortening work time will be accomplished.


SA TYPE COIL REWINDER

TYPICAL SA TYPE UNIFORM COIL REWINDERS

MFG300-12F Type
for DIRECT PLATE TYPE
SPECIFICATIONS
COIL THICKNESS0.1`0.8o
COIL WIDTH* 12`30o
COIL SIZE1,000 O.D.~300 I.D.
COIL WEIGHT200Kg/ea.(MAX)
SHAFT DIA.130(MAX)
MFG300-12FP Type
MFG300-17FP Type
for PAPER SLEEVE TYPE
SPECIFICATIONS
COIL THICKNESS0.1`0.8o
COIL WIDTH* 12`30o
COIL SIZE1,100 O.D.~300 I.D.
COIL WEIGHT200Kg/ea.(MAX)
SHAFT DIA.130(MAX)
* NOTE : COIL WIDTH In case of exceeding 30m/m,suitable size and number of SA type Uniform Coil Rewinders are to be installed.


DIRECTIONS

1. use slip effect during rewinding.
2. suitable slip ratio: 1.2`1.5 times of slitting speed for high yield.
3. materials for separator disk: quenched and polished tool steel plate or glass fiber reinforced epoxy resin plate.



Home
SUNSHINE INDUSTRIES CORP.
TOKYO,JAPAN
Phone 81-3-3605-2078 Fax 81-3-3605-2083